Charlie’s Floor CareRefinishing · Georgia
CallGet a free quote
Services→Our Work→About→FAQ→Contact→
Call (678) 481-9589Get a free quote

Buford, Georgia · Serving the surrounding cities

Bring your old hardwood back to life.

Charlie’s Floor Care sands, seals and refinishes hardwood floors for homeowners across Georgia — taking tired, scratched, gray-edged boards back to the color and shine they were made with.

Get a free quoteCall or text (678) 481-9589

A new local business, now booking its first projects. You get careful work and Charlie’s full attention — because there is no one else to hand it to.

Oak · sanded & refinishedBefore ↦ After

Owner-operated

Charlie quotes it and does it

Free estimates

In person, written, no pressure

Georgia-wide

Based in Buford, travel to you

Price

Straight talk about price.

The promise

We’ll beat any written quote by $100.

If you have a written quote from another flooring company, we’ll beat it by $100. Send it over and hold us to it.

What a refinish runs depends on three things: how much floor there is, what condition it’s in, and the finish you choose. So instead of guessing at a number over the phone, Charlie comes out and looks at the actual boards. The estimate is free, and the number he writes down is the real one.

  • Square footage
  • Condition of the floor
  • The finish you choose
Get a Free Estimate

Or text a photo to (678) 481-9589

The work

What refinishing actually does for your floor

All services→
01

Floor refinishing

Sanding off the worn surface and laying down a fresh finish. Scratches, dull spots and gray traffic lanes go away, and the wood’s own color comes back.

02

Sanding & sealing

A full sand to bare wood, then a seal and finish coats that protect against spills, grit and the everyday traffic of a busy house.

03

Hardwood restoration

For floors that have been covered, patched or neglected. Board replacement, stain matching and a finish that pulls the whole room back together.

04

Floor care & repairs

Small fixes, squeaks, a single tired room, and straight advice on keeping a finished floor looking the way it did the day it cured.

A drum sander and edge sander parked on a bare oak floor in an empty room, with low afternoon light across the boards

The work itself

Refinishing is a sanding job before it’s a finishing job.

Every grit takes the marks of the one before it. That slow, unglamorous part is what makes a floor look deep instead of coated — and it is the part that gets skipped when a crew is rushing to the next house.

One floor at a time, start to finish, with the rooms sealed off and the dust collected at the machine.

The grit ladder

366080100120150180220

Coarse to fine. Each pass erases the marks of the last one — that’s what makes the final coat read clear instead of scratched.

Before & after

Same floor.
Different room.

Refinishing doesn’t replace anything. It takes the boards you already have and gives them a new surface — scratches gone, gray traffic lanes gone, the grain reading the way it did when the house was new.

Drag the handle to see what a worn, dull floor looks like next to a freshly finished one.

See the gallery
BeforeAfter
Drag to compare
Sample illustrationDrawn to show the difference. Real project photos go here as Charlie completes his first jobs.

Why Charlie’s

A small operation,
on purpose.

Big flooring companies send whoever is available. Here, the person who answers the phone is the person who does the sanding, staining and finishing. That is the whole pitch.

  1. 01

    Charlie does the work himself

    Not a rotating crew and not a subcontractor. The person who quotes your floor is the person holding the sander.

  2. 02

    Dust control that respects your house

    Work areas get sealed off, sanders run with dust collection, and the room gets vacuumed between passes. You still live there.

  3. 03

    Clear pricing before any work starts

    One written estimate, itemized, no surprises tacked on at the end. If the floor reveals something unexpected, you hear about it before I touch it.

  4. 04

    Local, and easy to reach

    Based in Buford and working across Georgia. When you call or text, you get Charlie — not a call center or a form inbox.

How it works

Three steps, and the first one takes a minute.

01

Tell me about the floor

Call, text a photo, or send the form. Rough square footage, how many rooms, and what you want the floor to look like when it’s done.

02

Free estimate, in person

I come out, look at the actual boards, and tell you honestly what refinishing can fix and what it can’t. Written estimate, no pressure.

03

Pick a day, I handle it

We set a date that works for your household. I sand, prep, stain and finish — then walk you through care before I leave.

Start with a free quoteText a photo of your floor

Where we work

Georgia homeowners,
from Buford outward.

Charlie’s Floor Care is based in Buford and travels to the job. Most work is in the cities around home, and for the right project I’ll go further across the state.

Not sure if your town is in range? Ask — the worst answer is that I can recommend someone closer.

Check my area

Around home

  • Buford
  • Suwanee
  • Cumming
  • Lawrenceville
  • Gainesville
  • Duluth
  • Flowery Branch
  • Winder

And the rest of Georgia, project depending.

Questions

Straight answers

All questions
What does refinishing actually involve?

Refinishing means sanding the floor down past the old finish and the worn top layer of wood, then building a new finish back up. Depending on the floor and the look you want, that includes a stain and a set of finish coats. It is not a coat of polish — it is a new surface made from the wood you already have.

How long will the floor be out of commission?

Usually a matter of days per area. It depends on the square footage, how much repair the floor needs, and how long the finish takes to cure. You get a real timeline in writing with the estimate, plus the day you can start moving furniture back.

How much dust are we talking about?

Sanding makes dust — anyone who says otherwise is selling something. I seal off the work area with plastic, run sanders with dust collection, and vacuum between passes. You may find some fine dust on nearby surfaces. You will not be living in a cloud.

How soon can we walk on it?

It depends on the finish and the weather. Plan on staying off the floor for at least a day, then socks only, and longer before rugs and heavy furniture go back. I give you the exact window before I start and leave written care instructions when I go.

Free estimate

Tell me about
your floor.

Send a few details and Charlie will get back to you to set up a free in-person estimate. No obligation, no pressure, no call center.

Call(678) 481-9589TextSend a photo of the floor

Free estimate, no obligation. Your details stay with Charlie — no call center.